Voiceserver.exe
Voiceserver.exe
#1Salut à tous,
Juste une question:
Dans le dash34 il y a ça:
[quote] Voice Volume: This is set to on by default and enables the new voice volume where by you can set the voice volume for both UHF and VHF radios via the comms panel in the cockpit. Changing the voice volume is
not realtime.
What this means is if a person is transmitting on the radio and you turn the volume up or down, you will not hear a volume change until the [/align]
next voice transmission – this is a limitation of the DirectX voice.
It is recommended to make a one or two click change in volume and then wait for the next transmission to see if the volume meets your needs. Be aware that changing the VHF volume also changes the volume of
the AI radio transmissions as well as the IVC volume of human pilots. NOTE: This requires a new voice
server exe if you are using a dedicated voice server – contact Booster for details. [/quote]
Où peut on contacter Booster pour beneficier de cette version du voiceserver ?
Merci !
[/align]
Juste une question:
Dans le dash34 il y a ça:
[quote] Voice Volume: This is set to on by default and enables the new voice volume where by you can set the voice volume for both UHF and VHF radios via the comms panel in the cockpit. Changing the voice volume is
not realtime.
What this means is if a person is transmitting on the radio and you turn the volume up or down, you will not hear a volume change until the [/align]
next voice transmission – this is a limitation of the DirectX voice.
It is recommended to make a one or two click change in volume and then wait for the next transmission to see if the volume meets your needs. Be aware that changing the VHF volume also changes the volume of
the AI radio transmissions as well as the IVC volume of human pilots. NOTE: This requires a new voice
server exe if you are using a dedicated voice server – contact Booster for details. [/quote]
Où peut on contacter Booster pour beneficier de cette version du voiceserver ?
Merci !
[/align]
#2
Cette nouvelle version a tendance à merdouiller (on a eu des pb's avec ça plusieurs fois) et Booster n'a plus beaucoup le temps de s'en occuper en ce moment, aux dernières nouvelles.
#4
Les comms interne ne marchent pas avec Vista tout simplement parceque Vista ne gere pas le DXsound.
Amraam.
Amraam.
#6
Oui merci Toopack, je l'ai vu... par contre pour son fonctionnement... , y'a un topo la dessus ???
#7
la méthode pour mettre en service ce serveur, telle qu'expliquée par Theureu :
"la manip a faire:
ouvrir la racine Falcon : lecteur C ------>falconOF4.5
là vous y trouverez un exe appeler : voiceserveurbms2.2.
vous le renommez en : voiceserver.
vous copiez ce fichier (clic droit -->copier )
au dessus vous avez un dossier : utilities.
vous l'ouvrez.
s'y trouve un dossier RL OF dans lequel vous collez le fichier copié (clic droit ------> coller)
a la demande "un fichier """""" existe déjà ,voulez vous le remplacer " vous repondez OUI"
"la manip a faire:
ouvrir la racine Falcon : lecteur C ------>falconOF4.5
là vous y trouverez un exe appeler : voiceserveurbms2.2.
vous le renommez en : voiceserver.
vous copiez ce fichier (clic droit -->copier )
au dessus vous avez un dossier : utilities.
vous l'ouvrez.
s'y trouve un dossier RL OF dans lequel vous collez le fichier copié (clic droit ------> coller)
a la demande "un fichier """""" existe déjà ,voulez vous le remplacer " vous repondez OUI"
C2D E 6750, Asus P5KC, Nvidia 8800 GT 512 Mo, 2 Go de RAM, Cougar FFSB R1, TIR PRO 3 + VE, PC dash 2
#8
ça c'est pour un lancement directe par le RL
sinon, pour le lancer directement > double clic dessus, puis "server"/"Host"/"Host" en laissant les règlages par défaut
ne pas fermer ni réduire la fenètre sinon ça ferme tout
un gros avantage de ce dernier > voir qui est connecté ou pas ( pour ceux qui ont des soucis de comms ça aide ....)
sinon, pour le lancer directement > double clic dessus, puis "server"/"Host"/"Host" en laissant les règlages par défaut
ne pas fermer ni réduire la fenètre sinon ça ferme tout
un gros avantage de ce dernier > voir qui est connecté ou pas ( pour ceux qui ont des soucis de comms ça aide ....)
#9
Sinon on est bien d'accord, ce voiceserver version windows ne marche pas sur un dedié comme une dedibox hein ?
#12
Nous on a réussi avec Virtual Audio Cable ...Sparrow a écrit :Sinon on est bien d'accord, ce voiceserver version windows ne marche pas sur un dedié comme une dedibox hein ?
ASUSTeK ROG MAXIMUS X HERO / Intel Core i5-8600K (4.6 GHz) / NVIDIA GeForce RTX 3080 Ti FE 12GB / 32GB DDR4 Ballistix Elite 3200 MHz / Samsung SSD 970 EVO Plus 2To / Be Quiet! Straight Power 11 1000W Platinum / Windows 11 Home 64-bit / HOTAS Cougar FSSB R1 (Warthog grip) / SIMPED / MFD Cougar / ViperGear ICP / SimShaker JetPad / Track IR 5 / Moniteur incurvé 27'' 1080p Samsung C27F396 / HP Reverb G2