Page 1 sur 1

nouvelle carte et pas cheros

Publié : lun. oct. 27, 2008 3:56 pm
par AMAX
nouvelle carte



http://www.leobodnar.com/products/BU0836X/
Image

mais aussi

http://www.lbodnar.dsl.pipex.com/gauges/index.html

Image

Perso je viens d'acheter celle cipour transformer mon hotas + palo CH game port en version USB avec rejout de 2 rotary sur le throtle

Publié : lun. oct. 27, 2008 4:35 pm
par Jallie
c'est toujours top ce qu'il nous fait Léo

j'ai son boitier USB la Léo-Box , pour passer mon pédalier du G25 en indépendant
et par la même
augmenter sa sensibilité à 1024 step au lieu des 128 d'origine.

et vous savez quoi --> ça marche nikel et sans soucis ;)

Publié : lun. oct. 27, 2008 8:51 pm
par ReactorOne
Ouai pas mal en effet. De plus, c'est vrai que ça a l'air d'être du matos sérieux!

s'louuuuuuuuu

R1

Publié : lun. oct. 27, 2008 10:29 pm
par 50H-Solo
Pour la modif qui permet d'animer les instrument d'Audi A3, c'est toujours en developpement, plus vu d'infos depuis un bon moment là dessus.
Pour le Bu836A, j'en ai 2 depuis un moment, une m'a servi a passer mon F16 Fighterstick de chez CH en USB, la deuxieme va surement servir a faire la même chose avec la pro throttle.

Publié : mar. oct. 28, 2008 12:10 am
par AMAX
je viens d'acheter la BU0836A et je compte l'utiliser pour le hotas ch et le palonier aussi.

8 analogique devrais suffir.

x et y pour le f16 combats stick

z pour le throttle

u et v pour palonier voir w pour le frein

il me restera 2 analogique que vais mettre en rotary sur le throttle. je pense les ajouter a droite comme sur le cougar.
50H-Solo a écrit :Pour la modif qui permet d'animer les instrument d'Audi A3, c'est toujours en developpement, plus vu d'infos depuis un bon moment là dessus.
Pour le Bu836A, j'en ai 2 depuis un moment, une m'a servi a passer mon F16 Fighterstick de chez CH en USB, la deuxieme va surement servir a faire la même chose avec la pro throttle.
quest ce que t'en pense solo

Publié : mer. oct. 29, 2008 6:51 pm
par 50H-Solo
Ca devrait le faire. :sorcerer:
Pour ma part, la carte m'a servi uniquement à modifier le stick. Le plus dur à été de passer les 25 fils pour les 20 contacts à travers le tube du manche.

Au départ, Je devais faire les 2 manettes avec une seule carte mais:
1) j'ai pas trouvé un cable de liaison Stick/throttle avec suffisemment de fils (une nappe fixe ne me satisfaisait pas)
2) Il n'y a pas assez de contacts supportés par la carte pour cabler la pro throttle
et le stick (20 contacts aussi sur la manette, j'aurais été obligé de sacrifier un
des 4 coolie hat)

Par contre, le combat stick et la Throttle standard, pas de pb, tout tient sur une seule carte.

Ce qui m'a donné le plus de fil à retordre, c'est la matrice à diode.
Comme je ne fais que du warbird, je n'envisage pas de rajouter des potards sur la manette, mais peut être des switches supplémentaires equipés du montage de Chris qui permet de transformer des switches permanent en momentanés.

Publié : dim. nov. 02, 2008 8:42 am
par AMAX
Probleme avec leo!
J'ai commandé y a une semaine la carte, mais pas de message de ca part pour quoi que ce soit .

J'ai payé par paypal, ce qui me rassure car si il envoie pas la carte je peut me faire remboursser par eux.

j'ai vue sur son forum que plusieur personne sont dans le meme cas que moi.

Il repond à aucun mail, il ne post plus sur son forum depuis plusieur mois. son dernier post est de juin.

Je sais pas ce qui ce passe, mais il est probable que Léo ai stopé son commerce de carte.

Si il avait pris des vacance ou du stopé temporairement, je pense qui il aurait averti, mais la rien.

Publié : lun. nov. 03, 2008 9:41 pm
par AMAX
autre site qui fait des carte usb similaire à leo et aussi des cartes spécial qui son dedié au jeu arcade.

http://groovygamegear.com/webstore/inde ... Path=76_81


Image

ainsi que ce site remplis d'astuce et de bidouille
http://www.mameworld.net/tigerheli/encoder/

Publié : lun. nov. 03, 2008 9:50 pm
par AMAX
ils font aussi des carte Output & Lighting
45$

32 led
usb
bien documenté.

Image

http://groovygamegear.com/webstore/inde ... cts_id=239


The LED-Wiz™ is a fully featured LED lighting and output logic controller capable of delivering up to 500ma per output at 5v DC. Programming tools are available for integration into your custom projects.

Resident control, animation and keyboard LED emulation software is currently in public beta and available for download.


Features:

* USB port communication and power.
* Up to 16 LED-Wiz boards per system.
* 32 uniquely controllable outputs and up to about 500 Hi-Output LEDs per board (15+ per output, external power source required for this type of operation)
* 48 levels of PWM intensity. Using RGB LEDs (common anode), theoretically 110,592 colors are possible.
* Each individual output can be set to one of the following hardware modes. These modes are set by the computer, and after that the hardware handles them by itself.
o Intensity
o Sawtooth (gradual up and gradual down)
o SquareWave (blink)
o SawDown (full on, gradual down)
o SawUp (gradual up, full on)
* Hardware pulse rates are controlled by a 7-level global speed setting.

Publié : lun. nov. 03, 2008 9:56 pm
par AMAX
Image
Starting at: $1.29
http://groovygamegear.com/webstore/inde ... cts_id=240
RGB-Drive™ Pushbutton Lighting module

Another GroovyGameGear innovation!

The RGB-Drive™ pushbutton lighting module simplifies the bottom mounting and wiring of an RGB LED.

Plugs right into the Electric ICE™ pushbuttons to enable color changing and lighting effects. Can also be used with most standard translucent pushbuttons with centered 5mm hole and most 5mm LEDs.

Does not interfere with normal pushbutton operation when properly installed.

LED Versions include a ULTRA-Bright RGB LED with specifications specially selected to maximize performance for "bottom-up" pushbutton lighting.





mais aussi

rampe de LED (cold light) aussi puissant qu'un neon mais à12 V sans chaleur.

http://groovygamegear.com/webstore/inde ... cts_id=307

This one was born out of pure frustration. The original marquee light sockets and wiring in my cabinet were shot, so I needed a replacement. Just as well, as the tubes weren't inexpensive nor especially easy to find. That cheap fluorescent fixture at the home store seemed like a great idea at the time. Sure it was pain to install; bulky plastic case, fat 110v cord and plug needed to be fed around components in the cabinet and a vacant spot on the power strip was required. But the work was done and everything was fine....until a few months later when the thing just died. I don't know why, maybe because I leave it on all of the time or maybe due to the heat that builds up in that small area, but nonetheless, it no longer worked. So I bought another and went through the same tiresome steps of installing it. Just a few short months later, the tube blew. Figuring this was the weak link, I considered buying a quality tube. It would cost only a dollar less than a new fixture with a tube included. But I bought it anyway, hoping for the best...3 months later the second fixture started blinking like it had gone mad and wouldn't stop until I finally pulled the plug. Months passed. I could no longer endure the dead stare of the dark marquee....something needed to be done.

Enter the NovaMatrix™ LED Marquee Light.

Features:

* Incredibly Bright - Each unit includes 16 intensely high output, wide-angle, "cool white" LEDs.
* Low Voltage - 12v operation means that the marquee light may be connected directly to your PC power supply for simple "auto-on" operation .
* Long Life - LEDs are rated at up to 100,000 hours of "on" time. That's up to 10 years longer than conventional lighting!
* Low Operating Costs - Reduce your carbon footprint by 1/1500 and stave off the end of the world by several milliseconds for every fluorescent you replace!*
* Small and Lightweight - 11.5" x .5" Can be mounted just about anywhere and on almost any surface. Optimal distance from marquee is 6" to 14".
* Includes a 6" power cable with connector for attaching to unit, screws and plastic standoffs.

Image

Publié : mar. nov. 04, 2008 2:18 pm
par AMAX