CheckSix Forums

Bonjour,

De retour en simul après une période d'abstinence (j'ai replongé), je me mets sur le Spit de DCS avec un Hotas Warthog et un palonnier TPR. Quant à repartir, autant y aller pour de bon!...
J'ai récupéré un script de Noid sur le site de DCS et l'ai lancé avec TARGET. Problème: à part la manette des gaz, aucun autre axe ne fonctionne. Pourtant, à la compil du script, tous les axes ont l'air d'être reconnus (copie écran ci-dessous). Il y a quand même deux lignes de HID Devices non reconnues. Mais je ne sais pas ce que c'est.

Qu'est-ce que je fais mal?

*** Allocated ProcInstances found from the previous run: use FreeProcInstance() ***
Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll"
Physical USB HID devices managed by script!
Currently plugged USB HID devices[3]:
1: "Joystick - HOTAS Warthog" - "USB\VID_044F&PID_0402&REV_0100"
2: "Throttle - HOTAS Warthog" - "USB\VID_044F&PID_0404&REV_0100"
3: "TPR T.Pendular Rudder" - "USB\VID_044F&PID_B68F&REV_0110"
USB HID device "Throttle - HOTAS Warthog"(USB\VID_044F&PID_0404\6&1A48ADD8&0&2) selected
USB HID device "Joystick - HOTAS Warthog"(USB\VID_044F&PID_0402\6&1B76F02F&0&5) selected
USB HID device with hardware id "VID_044F&PID_0403" cannot be found
USB HID device with hardware id "VID_044F&PID_B687" cannot be found
USB HID device "TPR T.Pendular Rudder"(USB\VID_044F&PID_B68F\6&1A48ADD8&0&6) selected
Virtual HID devices managed by script!
Connecting virtual joystick...Done
Device name set to Thrustmaster Combined
Connecting virtual keyboard...Done
Connecting virtual mouse (absolute axes)...Done

--------[ NOiD Spitfire LF Mk.IX Profile 2.9 ]--------

main returned 0

TWCSThrottle = "VID_044F&PID_B687"
JoystickF18 = "VID_044F&PID_0403"

Il nous faudrait le script pour pouvoir aider d'avantage.

Edit : https://www.digitalcombatsimulator.com/ ... s/3062387/

Le TPR ne fonctionne pas lorsque le script est actif car il n'est pas assigné dans le script, et n'en est pas exclu. Vous devriez l'exclure du script en ajoutant cette ligne au début :

Configure(&TFRPHARudder, MODE_EXCLUDED);

Problème: à part la manette des gaz, aucun autre axe ne fonctionne.

Où est-ce que vous vérifiez le bon fonctionnement du script?

Merci pour les explications et la ligne de script (que j'ai insérée). Je teste avec le Device analyser dans le TARGET script editor: tout fonctionne. Dans le jeux, plus aucun axe à part la manette droite du throttle.

Copie du script de Noid:

include "target.tmh" //default Thrustmaster function

int Eject ;
int Jettison ;
int Chainled ;
int Primer ;

int main()
{

Configure(&LMFD,MODE_EXCLUDED);
Configure(&RMFD,MODE_EXCLUDED);
Configure(&HCougar,MODE_EXCLUDED);
Configure(&T16000,MODE_EXCLUDED);
Configure(&T16000L,MODE_EXCLUDED);
Configure(&TFRPRudder,MODE_EXCLUDED);
Configure(&TFRPHARudder, MODE_EXCLUDED);

if(Init(&EventHandle)) return 1; //event handler

//shift button
SetShiftButton(&Joystick,S4);

//set pulse and delay lengths
SetKBRate(50,100);

//LED init state
ActKey(PULSE+KEYON+LED(&Throttle, LED_INTENSITY, 214)); //set Throttle backlight power to 5/6
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED0)); //set backlight OFF
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED1)); //set LED 1 OFF
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED2)); //set LED 2 OFF
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED3)); //set LED 3 OFF
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED4)); //set LED 4 OFF
ActKey(PULSE+KEYON+LED(&Throttle, LED_ONOFF, LED_CURRENT-LED5)); //set LED 5 OFF
if(Throttle[EORNORM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED1));
if(Throttle[EORMOTOR]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED1));
if(Throttle[EFLNORM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED2));
if(Throttle[EFLOVER]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED2));
if(Throttle[FLAPU]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4));
if(Throttle[FLAPM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED4));
if(Throttle[FLAPD]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4));
if(Throttle[PSF]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED5));
if(Throttle[PSM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED5));
if(Throttle[PSB]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED5));
if(Throttle[EACON]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED3));
if(Throttle[EACOFF]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED3));

/////////////////////////////////////////
//Joystick and Throttle Axis Definitions/
/////////////////////////////////////////
MapAxis(&Joystick, JOYX, DX_X_AXIS);
MapAxis(&Joystick, JOYY, DX_Y_AXIS);
MapAxis(&Throttle, THR_LEFT, DX_ZROT_AXIS);
MapAxis(&Throttle, THR_RIGHT, DX_Z_AXIS);

//Shift slew to mouse with S4, Shift slider axe to 2nd slider with S4
MapKey(&Joystick, S4, EXEC("MapAxis(&Throttle,SCX,MOUSE_X_AXIS,AXIS_NORMAL,MAP_RELATIVE);"
"SetSCurve(&Throttle, SCX, 0, 10, 0, 0, -5);"
"MapAxis(&Throttle, SCY, MOUSE_Y_AXIS, AXIS_NORMAL, MAP_RELATIVE);"
"SetSCurve(&Throttle, SCY, 0, 10, 0, 0, -5);"
"MapAxis(&Throttle, THR_FC, DX_THROTTLE_AXIS);"
));

MapKeyR(&Joystick, S4, EXEC("MapAxis(&Throttle, SCX, DX_XROT_AXIS, AXIS_NORMAL, MAP_ABSOLUTE);"
"SetSCurve(&Throttle, SCX, 0, 0, 0, 0, 0);"
"MapAxis(&Throttle, SCY, DX_YROT_AXIS, AXIS_NORMAL, MAP_ABSOLUTE);"
"SetSCurve(&Throttle, SCY, 0, 0, 0, 0, 0);"
"MapAxis(&Throttle, THR_FC, DX_SLIDER_AXIS);"
));

//Slew
MapAxis(&Throttle, SCX, DX_XROT_AXIS, AXIS_NORMAL, MAP_ABSOLUTE);
SetSCurve(&Throttle, SCX, 0, 0, 0, 0, 0);
MapAxis(&Throttle, SCY, DX_YROT_AXIS, AXIS_NORMAL, MAP_ABSOLUTE);
SetSCurve(&Throttle, SCY, 0, 0, 0, 0, 0);

//Slew click
MapKeyIO(&Throttle,SC,MOUSE_LEFT,USB[0x5D]); //mouse click, usb code 'num5' for trackir center

//Free assign to throttle friction lever in DCS
MapAxis(&Throttle, THR_FC, DX_SLIDER_AXIS);

printf(" \xa");
printf(" --------[ NOiD Spitfire LF Mk.IX Profile 2.9 ]-------- \xa");
printf(" \xa");

//////////////////////////////
//Joystick Button Definitions/
//////////////////////////////


MapKey(&Joystick,TG1,USB[0x2C]); //usb code 'SPC' 1st trigger MG
MapKey(&Joystick,TG2,L_ALT+USB[0x0A]); //usb code 'g' 2nd trigger MG + Canons
MapKeyIO(&Joystick,S1,PULSE+L_ALT+USB[0x34],L_ALT+USB[0x33]); //usb code ''' refuel reload, ';' Canon
MapKey(&Joystick,S2,R_SHIFT+USB[0x2C]); // Bomb release usb code 'SPC'
MapKey(&Joystick,S3,USB[0x1A]); // BRAKES usb code 'w'

//trim
MapKey(&Joystick,H1U,USB[0x60]); //view up usb code 'num8'
MapKey(&Joystick,H1D,USB[0x5A]); //view down usb code 'num2'
MapKey(&Joystick,H1L,USB[0x5C]); //view left usb code 'num4'
MapKey(&Joystick,H1R,USB[0x5E]); //view right usb code 'num6'

//tms
MapKey(&Joystick,H2U,USB[0x54]); //usb code '*' zoom -
MapKey(&Joystick,H2D,USB[0x55]); //usb code '/' zoom +
MapKey(&Joystick,H2L,0); //
MapKey(&Joystick,H2R,0); //

//dms
MapKeyIO(&Joystick,H3U,R_SHIFT+USB[0x12],R_CTL+USB[0x33]); //HUD DISTANCE + usb code 'o', trim usb code ';'
MapKeyIO(&Joystick,H3D,R_CTL+USB[0x12],R_CTL+USB[0x37]); //HUD DISTANCE - usb code 'o', trim usb code '.'
MapKeyIO(&Joystick,H3L,L_SHIFT+USB[0x12],R_CTL+USB[0x36]); //HUD WINGSPAN + usb code 'o', trim usb code ','
MapKeyIO(&Joystick,H3R,L_CTL+USB[0x12],R_CTL+USB[0x38]); //HUD WINGSPAN - usb code 'o', trim usb code '/'

//cms
MapKey(&Joystick,H4U,L_SHIFT+USB[0x11]); //Interior light LEFT + usb code 'n'
MapKey(&Joystick,H4D,L_CTL+USB[0x11]); //Interior light LEFT - usb code 'n'
MapKey(&Joystick,H4L,R_SHIFT+USB[0x11]); //Interior light RIGHT + usb code 'n'
MapKey(&Joystick,H4R,R_CTL+USB[0x11]); //Interior light RIGHT - usb code 'n'
MapKeyIO(&Joystick,H4P,TEMPO(USB[0x43],PULSE+USB[0x29],500),TEMPO(L_ALT+L_CTL+USB[0x15],PULSE+USB[0x48],500)); //usb code 'F10' map -LONG PRESS: Escape, mirror usb code 'r' -LONG PRESS: Pause

//////////////////////////////
//Throttle Button Definitions/
//////////////////////////////

//Functions definitions

Chainled = CHAIN(
LED(&Throttle,LED_ONOFF,LED_CURRENT^LED5),
LED(&Throttle,LED_ONOFF,LED_CURRENT^LED4),
LED(&Throttle,LED_ONOFF,LED_CURRENT^LED3),
LED(&Throttle,LED_ONOFF,LED_CURRENT^LED2),
LED(&Throttle,LED_ONOFF,LED_CURRENT^LED1
)); //STARTER ON LED ANIMATION


Eject = CHAIN(PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT^LED0),PULSE+L_CTL+USB[0x08]); //Chain needed for the ejection sequence on button "LDGH"

Primer = CHAIN(DOWN+USB[0x49],D(700),UP+USB[0x49],D(700));

//MIC
MapKeyIO(&Throttle,MSU,L_CTL+L_SHIFT+USB[0x3A],L_CTL+L_ALT+USB[0x35]); //usb code 'F1' for trackirpause, usb code '²' teamspeack whisper
MapKey(&Throttle,MSD,USB[0x35]); //usb code '²' teamspeack/Radio 1 Simple Radio
MapKey(&Throttle,MSL,DX6); //FREE
MapKey(&Throttle,MSR,SEQ(PULSE+L_CTL+USB[0x1E],PULSE+L_CTL+USB[0x1F],PULSE+L_CTL+USB[0x20],PULSE+L_CTL+USB[0x21],PULSE+L_CTL+USB[0x35])); //RADIO Cycle usb code '1-4 + '''
MapKeyIO(&Throttle,MSP,R_ALT+USB[0x35],DX2); //L_ALT+USB[0x35] Radio 2 Simple Radio, comm menu (in DCS)

//speedbrake
MapKeyIO(&Throttle,SPDB,PULSE+L_ALT+USB[0x0F],PULSE+L_CTL+USB[0x06]); //Torch on/off usb code 'L', Close Canopy usb code 'c'
MapKey(&Throttle,SPDM,0);
MapKey(&Throttle,SPDF,PULSE+L_SHIFT+USB[0x06]); //Open Canopy usb code 'c'

//Boat switch
MapKey(&Throttle,BSB,DX10); //FREE
MapKey(&Throttle,BSF,DX9); //FREE

//China hat
MapKey(&Throttle,CHB,DX12); //FREE
MapKey(&Throttle,CHF,L_SHIFT+USB[0x2C]); //Safety ON/OFF usb code 'SPC'

//Pinkie
MapKey(&Throttle,PSB,0); //
MapKey(&Throttle,PSM,CHAIN(PULSE+L_CTL+USB[0x18],PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED5))); // LED5 OFF usb code 'u'
MapKey(&Throttle,PSF,CHAIN(PULSE+L_SHIFT+USB[0x18],PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED5))); // LED5 ON usb code 'u'

//Left ap button
MapKeyIO(&Throttle,LTB,REXEC(0, 90, "ActKey(KEYON+Eject);"),DX15); //Ejection sequence, LED Blink, FREE

//Coolie
MapKeyIO(&Throttle,CSU,TEMPO(PULSE+USB[0x3A],AXIS(MOUSE_Z_AXIS, 2, 100),500),PULSE+USB[0x2F]); //view cockpitt usb code 'F1' -LONG PRESS:SCROLLWHEEL UP, Kneeboard previous usb code '['
MapKeyIO(&Throttle,CSD,TEMPO(PULSE+USB[0x3B],AXIS(MOUSE_Z_AXIS, -2, 100),500),PULSE+USB[0x30]); //view external usb code 'F2' -LONG PRESS:SCROLLWHEEL DOWN, Kneeboard next usb code ']'
MapKeyIO(&Throttle,CSL,PULSE+USB[0x3C],DXHATLEFT); //view flyby usb code 'F3', FREE
MapKeyIO(&Throttle,CSR,PULSE+USB[0x3D],PULSE+R_SHIFT+USB[0x0E]); //view arcade usb code 'F4', Kneeboard on/off usb code 'k'

//base
MapKeyIO(&Throttle,EFLNORM,0,CHAIN(PULSE+L_SHIFT+USB[0x27],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED2))); //fuel pump ON usb code '0' LED2 ON
MapKeyIO(&Throttle,EFRNORM,0,PULSE+L_SHIFT+USB[0x17]); //fuel valve ON usb code '0'
MapKeyIO(&Throttle,EFLOVER,0,CHAIN(PULSE+L_CTL+USB[0x27],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED2))); //fuel pump OFF usb code 't' LED2 OFF
MapKeyIO(&Throttle,EFROVER,0,PULSE+L_CTL+USB[0x17]); //fuel valve OFF usb code 't'
MapKeyIO(&Throttle,APUON,0,PULSE+L_SHIFT+USB[0x0B]); //Filter ON usb code 'h'
MapKeyIO(&Throttle,APUOFF,0,PULSE+L_CTL+USB[0x0B]); // Filter OFF usb code 'h'
MapKey(&Throttle,LDGH,L_CTL+L_SHIFT+USB[0x06]); //usb code 'c' DROP CANOPY
MapKey(&Throttle,FLAPU,CHAIN(PULSE+L_SHIFT+USB[0x0A],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4))); //GEAR UP usb code 'g' LED4 OFF
MapKeyIO(&Throttle,FLAPM,0,CHAIN(PULSE+L_CTL+USB[0x0A],D(),PULSE+L_ALT+L_CTL+USB[0x06],PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED4))); //GEAR DOWN DOOR CLOSED usb code 'g' 'c' LED4 ON
MapKey(&Throttle,FLAPD,CHAIN(PULSE+L_ALT+L_SHIFT+USB[0x06],PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4))); //DOOR OPEN usb code 'c' LED4 OFF
MapKeyIO(&Throttle,EACON,0,CHAIN(PULSE+L_SHIFT+USB[0x09],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED3))); //FLAPS DOWN usb code 'f' LED3 ON
MapKeyIO(&Throttle,EACOFF,0,CHAIN(PULSE+L_CTL+USB[0x09],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED3))); //FLAPS UP usb code 'f' LED3 OFF
MapKeyIO(&Throttle,RDRNRM,0,PULSE+L_CTL+USB[0x19]); //HUD ON usb code 'v'
MapKeyIO(&Throttle,RDRDIS,0,PULSE+L_ALT+USB[0x19]); //HUD OFF usb code 'v'
MapKey(&Throttle,APENG,L_CTL+L_SHIFT+USB[0x17]); //DROP TANK usb code 't'
MapKeyIO(&Throttle,APPAT,0,PULSE+R_ALT+USB[0x0C]); // COMPRESSOR M.S. usb code 'i'
MapKeyIO(&Throttle,APAH,0,CHAIN(PULSE+L_CTL+USB[0x10],D(),PULSE+L_ALT+USB[0x0C])); // MIX ON - COMPRESSOR AUTO usb code 'm' 'i'
MapKeyIO(&Throttle,APALT,0,PULSE+L_SHIFT+USB[0x10]); // MIX CUTOFF usb code 'm'
MapKey(&Throttle,IDLELON,CHAIN(DX30,D(),LED(&Throttle,LED_ONOFF,LED_CURRENT-LED0))); //Idle->off backlight OFF
MapKey(&Throttle,IDLERON,CHAIN(DX29,D(),LED(&Throttle,LED_ONOFF,LED_CURRENT-LED0))); //Idle->off backlight OFF
MapKey(&Throttle,IDLEROFF,CHAIN(LED(&Throttle,LED_ONOFF,LED_CURRENT+LED0),D(),PULSE+DX32)); //Off->Idle backlight ON
MapKey(&Throttle,IDLELOFF,CHAIN(LED(&Throttle,LED_ONOFF,LED_CURRENT+LED0),D(),PULSE+DX31)); //Off->Idle backlight ON
MapKey(&Throttle,EOLIGN,CHAIN(PULSE+L_SHIFT+USB[0x49],REXEC(0, 1500, "ActKey(KEYON+Primer);"))); //Fuel primer usb code 'inser'
MapKeyR(&Throttle,EOLIGN,PULSE+L_SHIFT+USB[0x49]); //Fuel primer usb code 'inser'
MapKey(&Throttle,EORIGN,CHAIN(
PULSE+R_CTL+USB[0x15],
D(),
PULSE+L_CTL+USB[0x15],
D(),
PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED1),
PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED2),
PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED3),
PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED4),
PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED5),
D(),
DOWN+USB[0x4A],
DOWN+USB[0x4C],
REXEC(0,100,
"ActKey(KEYON+Chainled);"
)));//Demarreur cover OPEN usb code 'r', Demarreur ON usb code 'home' Survolteur cover OPEN usb code 'r', Survolteur ON usb code 'suppr' LED1-5 BLINK
MapKeyR(&Throttle,EORIGN,CHAIN(
UP+USB[0x4A],
UP+USB[0x4C],
D(),
PULSE+R_ALT+USB[0x15],
D(),
PULSE+L_ALT+USB[0x15],
D(),
EXEC(
"if(Throttle[EORNORM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED1));"
"if(Throttle[EORMOTOR]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED1));"
"if(Throttle[EFLNORM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED2));"
"if(Throttle[EFLOVER]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED2));"
"if(Throttle[FLAPU]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4));"
"if(Throttle[FLAPM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED4));"
"if(Throttle[FLAPD]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED4));"
"if(Throttle[PSF]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED5));"
"if(Throttle[PSM]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED5));"
"if(Throttle[PSB]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED5));"
"if(Throttle[EACON]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED3));"
"if(Throttle[EACOFF]) ActKey(PULSE+KEYON+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED3));"
)));//Demarreur cover CLOSED usb code 'r' Survolteur cover CLOSED usb code 'r'
MapKeyIO(&Throttle,EOLNORM,0,PULSE+R_ALT+USB[0x0A]); //Magneto 1 ON usb code 'h'
MapKeyIO(&Throttle,EORNORM,0,CHAIN(PULSE+R_ALT+USB[0x0B],D(),PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT+LED1))); //Magneto 2 ON usb code 'g' LED1 ON
MapKey(&Throttle,EOLMOTOR,PULSE+L_ALT+USB[0x0B]); //Magneto 1 OFF usb code 'h'
MapKey(&Throttle,EORMOTOR,CHAIN(PULSE+R_CTL+USB[0x0B],PULSE+LED(&Throttle,LED_ONOFF,LED_CURRENT-LED1))); //Magneto 2 OFF usb code 'h' LED1 OFF

}

int EventHandle(int type, alias o, int x)
{
DefaultMapping(&o, x);
}

Vous avez bien chargé les fichers diff qui sont donné avec le script?

LOAD IN DCS CATEGORY AXIS THRUSTMASTER VIRTUAL GAME CONTROLLER.diff
LOAD IN DCS CATEGORY KEYBOARD.diff
LOAD IN DCS CATEGORY THRUSTMASTER VIRTUAL GAME CONTROLLER.diff

Oui, dans le dossier: C:\Users\Bebel\Saved Games\DCS\Config\Input\SpitfireLFMkIX\joystick

bebel a écrit : ↑

dim. oct. 06, 2019 8:36 am

Oui, dans le dossier: C:\Users\Bebel\Saved Games\DCS\Config\Input\SpitfireLFMkIX\joystick

Et en jeux vous avez bien chargé/appliqué ces "profils" dans les categories correspondantes? Les mettre dans le même dossier que le profil par défaut n'a aucun effet autant que je sache. Il faut charger le profil customisé et ainsi écraser le profil par défaut.

Oui, comme il l'était mentionné dans un document trouvé sur les forums C6 expliquant tout cela. C'est vrai qu'avant de lire ce doc très bien fait, je ne savais pas comment cela fonctionnait.

En tous cas, merci pour votre aide.