Check-Six Forums

&quot a écrit : [Commandline options]
# for more information see readme file in game directory
# for more information see http://www.eechcentral.com/wiki/index.p ... e=Eech.ini
[Communications]
maxplayers=4 # maximum number of players in a multiplayer game (def = 4)
ipa= # IP address (TCP/IP address) to connect to. A host can leave out the value.
usemaster=0 # Report game to internet masterserver (0 = off/private game, 1 = on) (def = 0) (recommended = 1)
pss=hoxdna.org # primary masterserver internet address (def = hoxdna.org)
sss=eech.dhs.org # secondary masterserver internet address (def = eech.dhs.org)
ccrs=215040 # connection receive size, initial guess of campaign data size (def = 215040)
cdrs=215040 # data record size, similar to above (def = 215040)
cpbs=215040 # pack buffer size, similar to above (def = 215040)
cpds=512 # packet data size (def = 512)
cgs=0 # force the comms to use DirectPlay guaranteed send instead of its own (0 = off, 1 = on) (def = 0)
crls=1000 # packet history list size, increase if client keeps getting kicked out by server (default = 1000)
crl=10 # number of times a client can re-request the same packet, increase for poor connections (def = 10)
cpt=5 # time delay for comms to wait for a packet before re-requesting it (n = seconds) (def = 5)
crto=2 # time delay for comms to wait before assuming re-requested packets was lost (n = seconds) (def = 2)
mur=15 # max update framerate for a server (not available for client) (n = frames/second) (TCP/IP = 5, IPX = 15) (def = 5)
cig=1 # interpolate helicopter position for smoother visuals (0 = off, 1 = on) (def = 1)
cvc=1 # removes dead player husks when client crashes to validate connection (0 = off, 1 = on) (def = 1)
cptl=10 # packet throttle limit, governs the flow rate of packets (mainly for modems) (def = 10)
cto=15 # timeout time before removing dead player husks (def = 15)
eufr=2 # client server entity update framerate, number of iterations (def = 2)
css=0 # show comms stats (0 = off, 1 = on) (def = 0)
cist=500 # comms initial sleep time (def = 500)
servlog= # filename for server log
[Dedicated server]
# for more information see http://www.eechcentral.com/wiki/index.p ... ted_server
dedicated=0 # dedicated server mode (0 = off, 1 = on) (def = 0)
pauseserv=0 # pause server if no clients connected (0 = off, 1 = on) (def = 0)
game_type=0 # available game types (1 = Freeflight, 2 = Campaign, 3 = Skirmish) (def = 0)
gunship_type=8 # available gunship types [NOTE!] dummy value (0 = Apache, 1 = Havoc, 2 = Comanche, 3 = Hokum) (def = 8)
path= # path to map/campaign/skirmish folder
[Graphics and Textures]
cbar=500 # distance that city blocks resolve (n = meters) (def = 500)
fs=1 # full screen mode (0 = window mode, 1 = full screen mode) (def = 1)
mfr=999 # maximum visual frame rate (n = frame rate) (def = 30)
32bit=1 # 32-bit rendering (0 = off, 1 = on) (def = 1)
nrt=0 # rendering to texture (0 = enabled, 1 = disabled) (def = 0) (disable in case of visual problems with MFDs or TADS)
notnl=0 # GeForce "TnL" support (0 = enabled, 1 = disabled) (def = 0)
3dreset=0 # reset screen resolution to 640x480 (0 = off, 1 = on) (def = 0)
dxtm=0 # DirectX texture management (should fix "unable to allocate hardware slot" error) (0 = off, 1 = on) (def = 0)
cg=0 # (clean graphics) re-installs graphics files (0 = off, 1 = on) (def = 0)
palette=1 # use textures.pal (if videocard supports it) (0 = off, 1 = on) (def = 1) (recommended = 0)
eofullrange=0 # eo ranges near to max fog distance (and objects are drawn up to it) 1=yes 0=no
render-tree-shadows=1 # 1=yes 0=no
high_lod_hack=0 # [EXPERIMENTAL!] Enables highest level-of-detail models at far distances. Nice for higher FOVs, bad for FPS (esp. near cities)
dwash=0 # rotor downwash (dust) (0 = off, 1 = on) (def = 1)
restricted_nvg_fov=1 # night vision restriction (0 = off, 1 = on) (def = 1)
russian_nvg_no_ir=0 # russian night vision has no FLIR (0 = off, 1 = on) (def = 0)
colourmfd=1 # MFDs will use colour when available (0 = off, 1 = on) (def = 1)
highreshud=1 # high resolution HUD (0 = off, 1 = on) (def = 1)
tsdrender=0 # TSD render options (0 - 4) (def = 0 (contours only))
tsdpalette=0 # TSD palette options (0 - 2) (def = 0)
tsdenemy=0 # TSD showing red force blue force colours (0 = off, 1 = on) (def = 1)
tsddetail=0 # TSD in high detail (0 = off, 1 = on) (def = 0)
texture_colour=1 # Use texture colours directly. [WARNING!] Use only with correct texture packs. (0 = off, 1 = on) (def = 0)
texture_filtering=1 # [EXPERIMENTAL!] texture blending (reacts to anisotropic filter setting) (0 = off, 1 = on) (def = 0)
mipmapping=1 # mipmapped textures (dds files). [WARNING!] Use only with correct texture packs. (0 = off, 1 = on) (def = 0)
dynamic_water=1 # dynamic water textures (0 = off, 1 = on) (def = 0)
night_light=1.0 # night light darkness level (0.0 - 1.0) (0.0 = fully dark, 1.0 = less dark) (def = 1.0)
persistent_smoke=1 # Burning targets emitting smoke for a long time. [Warning!] CPU intensive. (0 = off, 1 = on) (def = 1)
themes= #comma-separated list of directories for alternate psd files
[Views and Cameras]
# minfov is linked to key 7, maxfov is linked to key 9, normal fov is linked to key 8, normal fov = 60
minfov=20 # general field of view minimum
maxfov0=80 # general field of view maximum
g-force_head_movement=0.0 # amount of head movement caused by gravitational force (wideview only) (n = Gs, 1.0 = normal, 0.0 = off) (default = 0.0)
comanche_pilot=0.000,0.105,0.180,0.000 # wideview pilot position
comanche_co-pilot=0.000,0.105,0.180,0.000 # wideview co-pilot position
hokum_pilot=0.000,0.000,0.200,0.000 # wideview pilot position
hokum_co-pilot=0.000,0.000,0.200,0.000 # wideview co-pilot position
apache_pilot=0.000,0.050,0.200,-7.000 # wideview pilot position
apache_copilot=0.000,0.000,0.000,-10.000 # wideview pilot position
havoc_pilot=0.000,0.050,0.200,-5.000 # wideview pilot position
hud_code=0,0,10,0,0,10,0,0,10,0,0,10 #hud code for 4 gunships
wobbly-camera=1 # Make external cameras move wobbly and smoother (0 = off, 1 = on) (def = 1)
[Dynamics]
advancedfm=0 # different flight model Makes sideways flight easier, but not realistic (0 = off, 1 = on) (def = 0)
enginerealism=1 # realistic engine workload simulation model (0 = off, 1 = on) (def = 1)
enginestartup=0 # manual engine start up, off by default (0 = off, 1 = on) (def = 0)
drbs=1.0 # retreating blade stall, floating point scaling factor for RBS effect (default = 1.0)
drv=1.0 # rudder value, scaling factor for drag on tail rotation (default = 1.0)
dra=0.8 # rudder acceleration, scaling factor for tail rotation acceleration (default = 0.8)
drd=1.0 # main rotor drag, scaling factor for drag caused by main rotor (default = 1.0)
dmrl=1.0 # main rotor lift, scaling factor for lift of main rotor (default = 1.0)
dtrd=1.0 # tail rotor drag, scaling factor for drag caused by tail in forward flight (default = 1.0)
dzd=0.0 # cyclic deadzone (n = 40909348eadzone, 0.0 = no deadzone) (default = 0.0)
dyal=5.0 # yaw altitude loss (default = 5.0)
debug_show_force_vectors=0 # show force vectors on own helicopter for debuging purposes
[WUT]
# for more information see http://www.eechcentral.com/wiki/index.php?title=WUT
wut=gwut190 # Weapons and Unit Tweaking file (n = filename)
[Gameplay]
chaff=1.0 # effectiveness of chaff (0.0 - 1.0) (0.0 = ineffective, 1.0 = fully effective) (def = 1.0)
flare=1.0 # effectiveness of flares (0.0 - 1.0) (0.0 = ineffective, 1.0 = fully effective) (def = 1.0)
smoke=1.0 # effectiveness of smoke (0.0 - 1.0) (0.0 = ineffective, 1.0 = fully effective) (def = 1.0)
fog=14400 # sets reshroud time for "fog of war" (n = seconds) (def = 14400 (4 hours))
cpac=1 # Capture and utilize aircraft landed at captured bases (0 = off, 1 = on) (def = 1)
uit=5.0 # User invulnerable time at mission start (n = seconds) (def = 5.0)
faa=1 # fly any aircraft (0 = off, 1 = on) (def = 1)
radarinf=1 # infantry invisible and undetectable by radar (0 = off, 1 = on) (def = 1)
grstab=1 # ground stabilisation of FLIR (0 = off, 1 = on) (def = 1)
manual_laser/radar=0 # operate radar and laser manually (0 = off, 1 = on) (def = 0)
targeting_system_auto_page= 1 # autoswitch MFD to according targeting system (0 = off, 1 = on) (def = 1)
camcom=0 # Campaign Commander (0 = off, 1 = on) (def = 0)
campaign_map_mode=1 # campaign map resolution (1 = default resolution, 2 = high resolution) (def = 1)
campaign_map_palette=1 # campaign map palette (1 = default shades, 2 = like paper map
map_update_interval=120 # enemy units update rate (n = seconds) (def = 120)
destgt=0 # designated target list (0 = off, 1 = on) (def = 0)
cannontrack=1 # cannon tracking boresight (0 = no tracking, 1 = track if no acquire, 2 = always track IHADSS/HIDSS/HMS) (def = 1)
unpadlock_on_handover=0 # unpadlock on handover from HMS to TADS = 0 (off)
pilot_as_periscope_default=0 # stay in pilot seat when switching to periscope = 0 (off)
TSD_mouse_control=1 # allows mouse control of TSD (Apache only) for selecting targets and creating PFZs
co_pilot_reports_targets=1 # Co-pilot will report targets he finds, and add them to TSD
[Joysticks and TrackIR]
eopann=-1 # joystick number for EO-camera panning
eopanv=0 # joystick DirectX axis for vertical EO-camera panning
eopanh=0 # joystick DirectX axis for horizontal EO-camera panning
eozoomn=-1 # joystick number for EO-camera zooming
eozoomax=0 # joystick DirectX axis for EO-camera zooming
field_of_viewn=-1 # joystick number for field of view (zoom) of main view
field_of_viewax=5 # joystick DirectX axis for field of view (zoom) of main view
cyclicn=-1 # Joystick number for cyclic
cyclich=0 # Joystick DirectX axis for cyclic horizontal
cyclicv=0 # Joystick DirectX axis for cyclic vertical
collectiven=-1 # Joystick no. for the collective
collectiveax=0 # Joystick DirectX acis for the collective
ruddern=-1 # Joystick no. for the rudder
rudderax=0 # Joystick DirectX axis for the rudder
joylookn=-1 # joystick no. used for joystick look
joylookh=0 # joystick DirectX axis used for horizontal joystick look
joylookv=0 # joystick DirectX axis used for vertical joystick look
joylookst=30 # joystick look step (1 = min, 100 = max) (def = 30)
nonlinear-cyclic=1 # use non-linear control for cyclic (less sensitive around center) (0 = off, 1 = on) (def = 1)
nonlinear-pedals=1 # use non-linear control for pedals (less sensitive around center) (0 = off, 1 = on) (def = 1)
nonlinear-collective-zone1=0.30 # non-linear control value for throttle (n = % throttle position joystick to represents 60% collective) (10= 0.1) (0.0 = off (linear control), 1.0 = max) (def = 0.3)
nonlinear-collective-zone2=0.70 # non-linear control value for throttle (n = % throttle position joystick to represents 100% collective) (10= 0.1) (0.0 = off (linear control), 1.2 = max) (def = 0.7)
reverse_pedal=0 # reversed pedal input (0 = off/blue force/USA, 1 = on/red force/Russia) (def = 0)
msl=0 # activates mouselook (and TrackIR when present) (0 = off, 1 = internal, 2 = external, 3 = both) (def = 0)
msls=15 # mouselook speed (when msl=1) (n > 0) (def = 15), POV speed (when msl=0) (n > 0, max = 20) (def = 13)
TIR_6DOF=0 # 6 DoF support for TrackIR (Hokum and Comanche only) (0 = off, 1 = on) (def = 0)
external_trackir=0 # (only when msl=1) external cameras controlled by TrackIR (0 = off, 1 = on) (def = 0)
external_trackir_dir=0 # (only when external_trackir=1) invert external cameras view direction (0 = off, 1 = on) (def = 0)
[Miscellaneous]
filter=1 # session filtering (0 = off, 1 = on) (def = 1)
autosave=0 # autosave (n = minutes, 0 = off) (def = 0)
dfr=0 # display framerate (0 = off, 1 = on, 2 = log to file "framerate.txt") (def = 0)
goto=0 # "GOTO" (teleport) functionality on campaign map (0 = off, 1 = on) (def = 0)
vfm=0 # vector flight model (activates viewer or "UFO" flight mode) (0 = off, 1 = on) (def = 0)
psr=1 # player start rank for new pilots (1 - 5) (def = 1)
ns=0 # bypass soundcard (useful for tracking hardware conflicts) (0 = off, 1 = on) (def = 0)
hdwrbuf=0 # hardware buffers to use for sound (0 = software only, n = number of hard buffers) (def = 0)
mta=4 # maximum time acceleration (n = time multiplier) (default = 4)
nomcm=0 # no mission complete music (0 = off, 1 = on) (def = 0)
MEMEXPORT=0 # export cockpit information to a shared memory area (0 = off, 1 = on) (def = 0)
export_mfd=0 # enables MFD export on multimon systems (0 = off, 1 = on) (def = 0)
export_mfd_adapter=0 # graphic adapter for MFD export screen (0 = first, 1 = second, ...) (def = 0)
export_mfd_screen_width=640 # resolution of export screen (n = pixels horizontally) (def = 640)
export_mfd_screen_height=400 # resolution of export screen (n = pixels vertically) (def = 400)
export_mfd_left_pos=0,0,256,256 # left MFD position (def = 0,0,256,256)
export_mfd_right_pos=384,0,640,256 # right MFD position (def = 384,0,640,256)
export_mfd_single_pos=0,0,256,256 # single MFD position (Havoc, Hind and Black Shark only) (def = 0,0,256,256)
[end of file]